Hotel RFID Card Digital Electronic Keyless Security Entry Door Lock
Mechanism of FUYU hotel lock: - The structure of our hotel lock is more stable than other ordinary hotel locks in the market, which will reduce fault rate during daily usage. - The installation of our hotel lock is easier than other ordinary hotel locks in the market because of the structure...
Mechanism of FUYU hotel lock:
- The structure of our hotel lock is more stable than other ordinary hotel locks in the market, which will reduce fault rate during daily usage.
- The installation of our hotel lock is easier than other ordinary hotel locks in the market because of the structure design.
- The fixing method (fixed on door) of our hotel lock is firmer than other ordinary hotel locks in the market, so it is more durable.
- With emgergency-escape function, under emergent event, the guests inside the room just need to press down the lever handle, then, all latches and bolts of lock case will be retract at the same time, and the guest can run away at once.
- Each lock matched with mechanical key, under emergency event, person outside can open the lock by key.
- With back-locked function, make the guest feel safer staying in the room.
- With anti-insert function, once the door closed, someone outside can not open the lock by insert hard card on the latch.
- Once the door closed, the lever will be separated with the open cam inside the lock, which can avoid someone open the lock by pressing down the lever with a big force.
- If the guest go outside, but the door is not closed completely, there is a alarm to remind the guest that the door is still open.
- Easy repair if there is something wrong.
Main Specifications of FUYU Hotel Lock:
4V ～ 6.5V
Low Voltage Alarm
4.8V ± 0.2V
-20℃ ～ 85℃
15% ～ 95% RH (Relative Humidity)
4pcs "AA" Alkaline Battery(Around 20,000 Cycles by normal opening)
|Lock Case and Mechanical Cylinder|
203mm x 99mm x 28mm (Forend width:28mm, main body thickness:18mm)
Centre to Centre Distance
Solid brass cylinder, with single-rwo-pin computer keyway (6 pins)
Material of Latch & Bolt
Solid zinc alloy die-cast
Quantity of Latch & Bolt
1 pc deadbolt, 1 pcs three-piece latch with silent-closed function, 1 pc auxiliary latch with dead-locking function.
Material of Casing
High Quality Cold-rolling Steel with protective coating.
|Main Features of complete set|
Left hand inward, Right hand inward, Left hand outward, Right hand outward.
Fitting Door Thickness
Standard: 38 ～ 55mm. Other requirements can be customized.
GA-374-2001-Electronic Anti-theflt Locks
|GB21556-2008 General Security Technical Requirements for Locks|
|Special Features of Product design|
1. Front panel of induction area is fixed though the cylinder hole by double screw bolts at the back side, which is firmer and breaks the tradition of fixing by self-tapping screws.
2. Inspired by Aviation Industry, and as a leading technical manufacturer in field of high performance material, our model 6109 also carrys forward this advantage, faceplate is made of revolutionary aluminum alloy, which has outstanding strength and durability, and the surface is anodized and anticorrosive.
- Previous: Durable Stainless Steel Electronic Lock Security Hotel Apartment Office Credit Card Ic Card Smart Door Lock
- Next: Single Cylinder Commercial Door Cylindrical Lever Lock